Light the night up with the Guardian Angel Devices Elite Series Multi-Functional Kayak Light! Weighing in at just 3 ounces and featuring a powerful magnetic mounting system, this lightweight light is built to attach to nearly any surface! Dustproof, shockproof, and waterproof; the Kayak Light is built to handle it all! The Elite Series Kayak Light is made with a long-lasting rechargeable battery. Designed to keep you safe, this light has long-range visibility, be seen up to five miles away with these powerful LED’s.

The Kayak Light has four brightness levels, low, medium, high, and max. The lights and patterns on each side of the light can be controlled independently, giving you maximum versatility to light up exactly how you need. This light is also equipped with a low light red light designed to offer light for you without compromising your night vision. The light is configured with an emergency mode, which activates all the strobe features of all the lights or an emergency SOS flash. Whether youre looking for a light to help you see or make sure you’re being seen, the Guardian Angel Elite Series Kayak Light will fit your every need.

• Enhanced LEDs with 4 brightness settings
• Lightweight Approximately 3 oz.
• Durable Waterproof, dustproof, shockproof, IP68 Rated
• Long Range Visibility Rated up to 5 miles of visibility using 18 high powered LEDs, 360-degree illumination
• Stealth Work Light Feature Single white LED work light for low light environments
• Four Different Brightness Settings Low, Medium, High, and Max
• Extreme Battery Life Rechargeable lithium-ion battery
• High capacity battery
• Type-C charging connector – We upgraded from Micro USB to Type-C. Not only is it easier to plug in, but it also has reduced the charging time from dead to full to less than 2 hours, even with the bigger battery.
• Built in Magnet Mounting System Built-in Neodymium magnet and corresponding magnet clip (included) attaches to nearly any surface
• Constant On or Flashing Patterns Either side has constant on or flashing settings
• Independent Light Controls 4 different light controls provide maximum lighting versatility, including an all-flash emergency mode
• SOS feature – Holding down the Brightness Setting button will set the device to SOS flash pattern strobe.
• Heatsink on the PCB board – With this new heat sync, the outside of the device remains at about same temperature even while the LEDs are on the brightest setting.
• Tether attachment – All devices have a small built-in hinge where the tether can be attached (tether sold separately)
• LED battery indicator – If you hold down the R button, LEDs on the backside of the device will animate showing the amount of battery life left

Prop 65 Warning